| *PRICES MAY CHANGE WITHOUT NOTICE* | |||
 |
|||
| IMAGE | PART # | DESCRIPTION | MSRP |
 |
119 | 3/4" Complete Vale Arm & Float Assembly |
$65.00 ea. |
|
120 | 1/2" Complete Vale Arm & Float Assembly - High pressure | $65.00 ea. |
 |
121 | 1/2" Complete Valve Assembly - Just Orange Float High pressure - Capable of up to 80 psi |
$50.89 ea. |
 |
122 | 3/4" Complete Valve Assembly - Just Orange Float |
$50.89 ea. |
 |
101 | Cap |
$9.30 ea. |
 |
102 | Bottom Base |
$15.30 ea. |
 |
103 | 3/4” Inlet |
$12.80 ea. |
 |
104 | 1/2" Inlet |
$12.80 ea. |
 |
105 | Top Base |
$18.50 ea. |
 |
106 | Lock Pin [2 Required] |
$4.50 ea. |
 |
107 | Plunger Seat |
$4.50 ea. |
 |
108 | Plunger - only |
$11.80 ea. |
 |
109 | Base Screws [4 required] |
$4.12 ea. |
 |
110 | Upper Arm |
$7.50 ea. |
 |
111 | Lower Arm |
$7.50 ea. |
 |
112 | Long Valve Arm |
$19.60 ea. |
 |
113 | Short Valve Arm |
$19.60 ea. |
 |
114 | Thumb Screw |
$4.12 ea. |
 |
115 | Float Screw |
$3.60 ea. |
 |
116 | Float Connect |
$7.80 ea. |
 |
117 | Round Float |
$18.80 ea. |
|
|||
 |
47 | 3/4” PVC Riser Extension | $5.90 ea. |
 |
48 | 3/4” PVC THD, 90 Elbow |
$6.50 ea. |
 |
49 | 3/4” PVC Two Inch Nipple |
$5.90 ea. |
 |
50 | 3/4” PVC Ball Valve |
$28.60 ea. |
 |
51 | 3/4” PVC Insert / Mip Insert |
$12.20 ea. |
 |
54 | PVC Ball Valve Assembly - all 5 PVC parts - no water valve |
$53.20 ea. |
 |
55 | Complete Water Valve w/ PVC ball Valve Assembly |
$92.20 ea. |
| 59 | Bucket For Model 4014 & 3009 | $39.25 ea. | |
 |
60 | 9-1/2” Green Water Float (2008 & 4014) |
$31.20 ea. |
| 61 | 11” Green Water Float (50040) | $38.20 ea. | |
 |
62 | #7 Black Rubber Water Plug (2008 & 4014) |
$5.20 ea. |
| 62A | #10 Black Rubber Water Plug (50040) | $8.50 ea. | |
| 62B | #7 Expandable | $8.90 ea. | |
 |
63 | Mounting Hardware Packet (3009) | $28.80 ea. |
| 64 | Mounting Hardware Packet (2008 & 4014) |
$26.60 ea. | |
| 65 | Mounting Hardware Packet (50040) | $29.90 ea. | |
 |
66 | S.S. EL Bracket (2008 & 4014) [4 required per drinker] |
$5.90 ea. |
| 67 | S.S. EL Bracket (50040) [4 required per drinker] | $6.90 ea. | |
| 68 | Open cell foam (3009 Lid) & (4014 & 50040 Base Seal) |
$1.10 per foot | |
 |
69 | Closed cell lid foam (2008 6-1/2’ & 4014 7-1/2’) |
$2.99 per foot |
 |
70 | Closed cell foam 2-1/2” wide (4014) |
$5.60 per foot |
 |
71 | 5/16 - 18 - 3/4" Hex Cap Bolt S.S. |
$2.90 ea. |
 |
72 | 10/24 - 2-1/2” Machine Screw Bolt Lid Screw S.S. |
$2.90 ea. |
| 73 | Lid screw 3” S.S. (50040) | $2.90 ea. | |
 |
74 | Model 2008 Lid - Insulated |
$280.00 ea. |
 |
75 | Model 2008 Base - Insulated |
$370.00 ea. |
| 76 | Model 3009 Lid - Insulated | $250.00 ea. | |
 |
77 | Model 4014 Lid - Insulated |
$298.00 ea. |
 |
78 | Model 4014 Base - Insulated |
$390.00 ea. |
